Armor & chainmail 3D print models
(8)Armour covers two worlds here: wearable cosplay pieces, chainmail panels, gauntlets, breastplates and armour patches designed for filament, and armoured creatures and figures, an armoured horse, an armoured grizzly, an armourer alchemist, sculpted for resin at miniature or display scale. The Cosplay & Props category holds the full wearable sets.
Cosplay armour 3D prints in PLA or PETG in parts sized to the body, then is sanded, filled, primed and strapped; printed chainmail is a flexible lattice that prints flat and drapes. Figure armour prints like any resin sculpt, with supports on plate edges and spikes. For wearables, check each piece against your build volume and plan a few days for finishing.
Armoured animal sculpts are tabletop mounts and monsters at 28 mm scale, with the rider often sold separately. The weapons to go with a costume are in swords, the head pieces in helmets, and the mounts in horses.
8 models
Frequently asked questions
The model page gives the base measurements. Scale the whole set uniformly in Lychee Slicer so pieces keep their proportions, print one piece such as a gauntlet first, and adjust before printing the rest.
Yes when printed flat in PLA or PETG with the recommended clearance; the links free up after a gentle twist. It is for costume use, not protection.
Sand to 400 grit, filler primer, gloss black, then a metallic silver spray and a dark wash wiped off the raised areas. Scratches and dents added with a sponge sell the effect.
Models in the Lychee Library open directly in Lychee Slicer, with the supports and settings prepared by the creator. Whether the file can also be exported depends on the licence each creator sets, shown on the model page.







