Mechs & robots 3D print models
(26)Walkers, mech girls, steampunk automatons and mechanical animals: the robots and mechs here are either tabletop pieces for sci-fi games or display sculpts with articulated-looking joints and panel lines that 3D print beautifully in resin.
Hard-surface models reward careful orientation, because support marks on flat panels show. Tilt flat panels a few degrees off the plate and keep supports on inner faces. Larger mechs are usually cut into parts that pin together. Japanese-style suits have their own page in Gundam and mecha, and the grimdark walkers are in sci-fi proxies.
26 models
Frequently asked questions
Supports attached to flat panels leave contact points, and panels parallel to the build plate show layer lines. Tilt the model 15 to 30 degrees and keep supports on the underside or inner faces.
Resin for anything with fine panel lines and cables under 20 cm. Filament suits large, blocky mechs and parts you want tough, such as poseable limbs.
Paint the metal colour, then sponge small chips of dark grey on the edges, add a thin rust-brown wash in the recesses and a dust tone on the feet. Keep it to the edges and the lower half.
Models in the Lychee Library open directly in Lychee Slicer, with the supports and settings prepared by the creator. Whether the file can also be exported depends on the licence each creator sets, shown on the model page.























