Gundam & mecha 3D print models
(5)Mecha in the Japanese tradition: Gundam-style suits, mechanical animals and robot kits, alongside quirky pieces like a mecha gnome or a mechanical siren. Where a design references a franchise, it is independent 3D print fan art.
Mecha kits are often multi-part, with joints that pin or snap together, and they print best in resin where panel lines and vents stay sharp. Western-style walkers and battle robots are on the mechs and robots page.
Print the joints in a tough resin if you intend to pose the model more than once; standard resin wears at the pins.
5 models
Frequently asked questions
Only when the creator designed them to be. The model page says whether joints are fixed, pinned or ball-jointed. Resin joints wear quickly; print them in a tough resin if you plan to pose the model often.
0.03 to 0.05 mm. Fine panel lines are the detail that makes a mecha read as a model kit, and coarser layers soften them.
After the base coat, run a fine brush loaded with thinned dark grey along each line; capillary action pulls it in. Wipe excess with a cotton bud before it dries.
Models in the Lychee Library open directly in Lychee Slicer, with the supports and settings prepared by the creator. Whether the file can also be exported depends on the licence each creator sets, shown on the model page.




