Knights & paladins 3D print models
(49)Armoured figures with shields, lances and capes for fantasy tabletop or display: knights, paladins and holy warriors, from wandering knights and tiefling paladins to large display pieces, all resin 3D print sculpts.
Plate armour prints beautifully in resin, with crisp edges and engraved details; keep supports on shields and cape edges. Mounted knights on larger bases appear in the same lines, with the mounts in horses, and prop-size blades in swords.
Shields are often separate parts, which print flat and clean; glue them after curing.
49 models
Frequently asked questions
Print at 0.03 to 0.05 mm, avoid supports on visible plates, and do not over-cure: long UV exposure softens fine edges and yellows light resins.
Often, so they print flat and clean. The model page says whether the creator split the figure; glue parts after curing.
Print the shield as a separate part, prime white, paint the field colour, then the charge with a fine brush over a light pencil sketch. A thin black line around the charge hides wobbles.
Models in the Lychee Library open directly in Lychee Slicer, with the supports and settings prepared by the creator. Whether the file can also be exported depends on the licence each creator sets, shown on the model page.























