Hooks & hangers 3D print models
(3)From a curved hook for keychains to wall hooks and the odd character named Hook: practical 3D prints that take an hour and hold up daily use when printed in the right material.
Print hooks in PETG or ABS on an FDM printer, lying on their side for layer strength, with 40 % infill or more, and check the screw holes. The keychain hook pairs with the keychains page; the larger wall systems are in shelves and storage boxes.
3 models
Frequently asked questions
A PETG hook printed on its side with 40 % infill holds a few kilograms, enough for coats and bags. Layer orientation matters more than infill: never print a hook standing up.
Only in a tough or ABS-like resin and for light loads such as keys. Standard resin snaps under weight.
Two screws through the printed holes into a wall plug, or a strong double-sided adhesive pad for light loads. Command strips hold small hooks on painted walls.
Models in the Lychee Library open directly in Lychee Slicer, with the supports and settings prepared by the creator. Whether the file can also be exported depends on the licence each creator sets, shown on the model page.


