Cyberpunk 3D print models
(18)Techwear masks and cat ears, a katana with sheath, Edgerunners fan figures and neon-lit characters: a mix of wearable cosplay pieces designed for FDM and resin 3D print figures and busts.
Techwear pieces are published in sets, masks and ears and patches, sized to be worn together; check each model page for the intended size. The mechanical side of the genre is in mechs and robots, the wearables in masks.
Print the figures in black resin and pick out the neon details with fluorescent paint, or use a UV-reactive resin for separate glowing parts.
18 models
Frequently asked questions
Masks, ears and armour patches labelled techwear or cosplay are sculpted at wearing size, usually for FDM in PLA or PETG. Figures and busts are display pieces for resin.
Print in black, mask the panel lines and airbrush fluorescent paint, or use a UV-reactive resin for separate glowing parts.
Characters with grounded poses and no long cables or antennas. Techwear details such as masks and pouches read fine at that scale; thin wires and glowing tubes are better at 75 mm.
Models in the Lychee Library open directly in Lychee Slicer, with the supports and settings prepared by the creator. Whether the file can also be exported depends on the licence each creator sets, shown on the model page.

















