Wall art & wall decor 3D print models
(7)A lion wall decoration, a Smaug wall piece, anime artwork reliefs and other flat-backed sculpts to hang: wall art that complements the Wall Decorations category with pieces filed elsewhere. Film and anime reliefs are fan art by independent creators.
Relief sculpts 3D print flat-back on the plate, which makes them easy in resin or FDM; check the hanging hole and print at the largest size your printer allows. Lettered pieces are in signs, and the clocks that hang next to them in clocks.
7 models
Frequently asked questions
FDM for large pieces above 20 cm, printed flat in PLA. Resin for detailed reliefs under 20 cm, printed with the back on the plate and no supports.
Most designs include a keyhole or a hook recess on the back. If not, glue a sawtooth hanger or a small magnet after curing.
Light sanding on FDM prints, a filler primer, then a metallic or stone-effect spray and a dark wash wiped off the raised areas. The wash turns a flat relief into a sculpture.
Models in the Lychee Library open directly in Lychee Slicer, with the supports and settings prepared by the creator. Whether the file can also be exported depends on the licence each creator sets, shown on the model page.





![Jinx Artwork\Wall Decor From League of Legends [3D STL] - 3D printable Art & Design](https://mango-production-buckets-librarymediafiles-m6zdfr5gpp0u.s3.us-east-1.amazonaws.com/models/94626a45-3bde-4a4d-b6a8-f42ece5f5663/preview-overflow.webp?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=AKIAWQFM3M26ZZZ6P34R%2F20261120%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20261120T095255Z&X-Amz-Expires=172800&X-Amz-Signature=3a95aef487633672483a97bc66cfa74e1b123f674781d7fd60574b02b56f148e&X-Amz-SignedHeaders=host&x-id=GetObject)
