Kaiju & Godzilla 3D print models
(5)Giant monsters belong on a big build plate. Gojira, Ghidorah and Mothra sculpted by fans, plus figures from the Kaiju No. 8 series: independent 3D print sculpts, with the designs belonging to their studios.
Kaiju are usually printed as display pieces at 15 to 30 cm, in resin for the scales and spines, hollowed to save material. Several come cut into parts so a tall monster fits a standard printer. For other big creatures at the same size, the dragons and dinosaurs themes are the natural neighbours.
5 models
Frequently asked questions
As tall as your printer's Z height minus supports, typically 15 to 20 cm on a mid-size MSLA machine. Taller models are cut by their creators into two or three parts that pin together.
Yes. In Lychee Slicer, hollow with a 2.5 mm wall and add drain holes at the base; it saves resin, reduces suction and lowers the risk of cracking during curing.
Drill 2 mm holes in both faces, glue a brass rod with cyanoacrylate, and fill the seam with a drop of resin cured by a UV torch. Dry-fit before gluing; printed parts can shrink a fraction.
Models in the Lychee Library open directly in Lychee Slicer, with the supports and settings prepared by the creator. Whether the file can also be exported depends on the licence each creator sets, shown on the model page.




