In: Models

    Iron Man 3D print models

    (13)

    Iron Man is the most printed suit in the Marvel universe. The fan-made armours, helmets and busts published here include the MK1 and MK17 at large scale, the MK38 Igor as a miniature, a classic bust, keychains and tabletop-size figures, all 3D print files sculpted by independent creators; the character belongs to Marvel.

    Two kinds of projects live here. Display pieces, printed in resin at 15 to 30 cm, where the panel lines and the glow of the arc reactor are the point; and gaming miniatures at 32 mm for superhero skirmish games. A few creators cut their large-scale suits into parts that print on a standard build plate and assemble with pins.

    Hard-surface armour is forgiving to print but unforgiving on supports: marks on flat panels show, so keep the creator's support placement where possible and sand lightly before priming. The rest of the Avengers are in the Marvel theme.

    13 models

    Ironman MK17 Large Scale - 3D printable Heroes & Villains
    Ironman MK17 Large Scale
    ‌
    ‌
    Iron Man - 3D printable Heroes & Villains
    Iron Man
    ‌
    ‌
    Iron MAN MK1 Large Scale - 3D printable Heroes & Villains
    Iron MAN MK1 Large Scale
    ‌
    ‌
    Ironman Bust - 3D printable Heroes & Villains
    Ironman Bust
    ‌
    ‌
    Ironman MARK17 Mini - 3D printable Heroes & Villains
    Ironman MARK17 Mini
    ‌
    ‌
    Iron MAN MARK1 Mini - 3D printable Heroes & Villains
    Iron MAN MARK1 Mini
    ‌
    ‌
    Ironman Igor MK38 Large Scale - 3D printable Heroes & Villains
    Ironman Igor MK38 Large Scale
    ‌
    ‌
    Superior Iron Man Miniatures - 3D printable Heroes & Villains
    Superior Iron Man Miniatures
    ‌
    ‌
    Ironman Igor MK38 Mini - 3D printable Heroes & Villains
    Ironman Igor MK38 Mini
    ‌
    ‌
    Ironman A - 3D printable Heroes & Villains
    Ironman A
    ‌
    ‌
    Ironman Keychain - 3D printable Props
    Ironman Keychain
    ‌
    ‌
    Ironman B - 3D printable Heroes & Villains
    Ironman B
    ‌
    ‌
    Ironman Centurion - 3D printable Heroes & Villains
    Ironman Centurion
    ‌
    ‌

    Frequently asked questions

    A bust or helmet. They print in one piece, need little assembly and show the surface quality of your printer. The full-body large-scale suits are multi-part projects that reward a second or third print once you are comfortable with resin.

    Resin for anything under 30 cm: the panel lines stay crisp and the surface needs almost no sanding. Filament makes sense for wearable or very large parts, where strength and size matter more than fine detail.

    Gloss black primer, then a metallic red and a metallic gold airbrushed or brushed thin, and a gloss varnish. The black undercoat gives the metallics their depth; skip it and they look flat.

    Models in the Lychee Library open directly in Lychee Slicer, with the supports and settings prepared by the creator. Whether the file can also be exported depends on the licence each creator sets, shown on the model page.