Dice towers 3D print models
(7)Castles, skull temples, royal relics and faction-themed towers that drop dice down internal ramps into a tray: the dice tower is the tabletop accessory people 3D print first, usually designed for FDM at 15 to 25 cm but also printable in resin in parts.
Towers are hollow with internal baffles, so check the print orientation and whether the tray is a separate part; scale it to your dice size and print in PLA or a sturdy resin. Card and deck storage is in deck boxes, and the bases theme covers the rest of the table.
7 models
Frequently asked questions
Towers are designed for standard 16 mm dice; most also pass a 20 mm D20. The model page lists the internal width. Scale up by 10 % in Lychee Slicer for larger dice.
FDM in PLA for a tower you will use at the table: tougher and cheaper at that size. Resin for a small decorative tower with fine carvings, printed in parts.
Glue a strip of felt or thin foam on each internal ramp and in the tray. Printing the tray in TPU also deadens the sound of a D20 landing.
Models in the Lychee Library open directly in Lychee Slicer, with the supports and settings prepared by the creator. Whether the file can also be exported depends on the licence each creator sets, shown on the model page.






