In: Models

    Busts 3D print models

    (49)

    A bust is the shortcut to a display-quality 3D print: no legs to balance, no base to fill, just a head and shoulders where all the sculpting effort goes into the face. The Library's busts range from fantasy portraits, an orc, a dwarf aviator, a witch, to pop culture pieces like Deadpool, Vegeta or a classic Iron Man helmet, and a long line of dragon heads.

    Most are printed in resin between 8 and 20 cm tall. At that size the skin texture, hair strands and eye detail of a good sculpt are visible, and painting becomes the main part of the project. Several creators publish the same character as a bust and as a full figure, so the model page often links a matching set.

    Above 10 cm, hollowing is almost mandatory: a 2 to 3 mm wall and two drain holes at the bottom of the shoulders save most of the resin and keep the surface intact. Many of the Marvel and dragon busts were sculpted with that cut already in place.

    49 models

    Omina Bust - 3D printable Characters
    Omina Bust
    ‌
    ‌
    Anubis Bust - 3D printable Creatures
    Anubis Bust
    ‌
    ‌
    Batman Who Laughs Bust - 3D printable Heroes & Villains
    Batman Who Laughs Bust
    ‌
    ‌
    Pikachu Zoro Bust - 3D printable Video Games
    Pikachu Zoro Bust
    ‌
    ‌
    Ironman Bust - 3D printable Heroes & Villains
    Ironman Bust
    ‌
    ‌
    Monkey King bust - 3D printable Fantasy
    Monkey King bust
    ‌
    ‌
    Mysterio Bust - 3D printable Heroes & Villains
    Mysterio Bust
    ‌
    ‌
    Nadira, the Desert Rose - Bust Version - 3D printable Characters
    Nadira, the Desert Rose - Bust Version
    ‌
    ‌
    Vegeta Bust - 3D printable Anime & Manga
    Vegeta Bust
    ‌
    ‌
    Cerberus Bust - 3D printable Busts
    Cerberus Bust
    ‌
    ‌
    Green Dragon Bust - 3D printable Busts
    Green Dragon Bust
    ‌
    ‌
    Rosie the Riveter - BUST - 3D printable Characters
    Rosie the Riveter - BUST
    ‌
    ‌
    Charizard Bust - 3D printable Anime & Manga
    Charizard Bust
    ‌
    ‌
    Salmon Dragon Bust - 3D printable Busts
    Salmon Dragon Bust
    ‌
    ‌
    Uncle Sam - Bust - 3D printable Characters
    Uncle Sam - Bust
    ‌
    ‌
    BUST Dhog Skullcrush - 3D printable Characters
    BUST Dhog Skullcrush
    ‌
    ‌
    BUST Bounty Hunter - 3D printable Characters
    BUST Bounty Hunter
    ‌
    ‌
    Vector Brawler bust - 3D printable Creatures
    Vector Brawler bust
    ‌
    ‌
    Deadpool Bust - 3D printable Characters
    Deadpool Bust
    ‌
    ‌
    Dragon Head - Bust - 3D printable Anime & Manga
    Dragon Head - Bust
    ‌
    ‌
    Wolfman bust - 3D printable Creatures
    Wolfman bust
    ‌
    ‌
    Fairy Dragon Bust - 3D printable Characters
    Fairy Dragon Bust
    ‌
    ‌
    Spider Gwen - Bust - 3D printable Heroes & Villains
    Spider Gwen - Bust
    ‌
    ‌
    Gwenum Bust - 3D printable Heroes & Villains
    Gwenum Bust
    ‌
    ‌

    Frequently asked questions

    Twelve to fifteen centimetres is the sweet spot: large enough to paint eyes and lips with a brush, small enough to print in one piece on a mid-size MSLA printer. Many sculpts are published at that size by default; scale in Lychee Slicer if you want a larger statement piece.

    Yes, even with the flat cut at the shoulders. Chins, noses, hair locks and ears overhang once the model is tilted for printing. Use the creator's supported version when there is one; otherwise automatic supports plus a few manual ones under the chin are enough.

    A dragon head or an orc bust: strong shapes, no fragile hair strands, and a surface that looks good in a single dark resin with a dry-brush. Character busts with hair and glasses come next.

    Models in the Lychee Library open directly in Lychee Slicer, with the supports and settings prepared by the creator. Whether the file can also be exported depends on the licence each creator sets, shown on the model page.